|
Setting Up your Computer
The Setup menu is where you specify your computer configuration (ie:
controllers, drives, disks, etc.). In most cases, you will be able to use
DiskDupe right away without changing anything in the Setup menu. If you do
change something, your changes will be automatically saved in the
configuration file DISKDUPE.DAT, and will affect all jobs that have been
created.
The easiest way to set up your computer is to go down each item in the Setup
menu. For the basic setup, you would need to access Controllers, Autoloaders
and Drives. Below lists a summary of the basic steps to set up your computer
with DiskDupe:
- (Pro/Auto/AutoPro) Go into the Setup menu and select Controllers. Press
Auto-Set and DiskDupe will automatically set up your controllers for you.
- (Auto/AutoPro) Once you have finished setting up your controllers, select
Autoloaders from the Setup menu and edit or add the specifications of the
autoloader that you will be using.
- When you have finished setting up your autoloader, select Drives from the
Setup menu and press Auto-Set, which will automatically set up your drives for
you.
- Before closing the Drive List dialog box, click on Test to check your
computer setup. If no error messages appear, you are ready to begin
duplicating.
|
