DiskDupe will automatically sense what type of drives are installed in A: and
B: by checking your computer's CMOS configuration. If you want to change these
settings, select Setup|Drives and pick the drive that you want to edit. You
don't need to change your computer's CMOS configuration or reboot your computer
to change drive types in DiskDupe.
Since DiskDupe talks directly to your floppy controller and bypasses Dos and
the BIOS for maximum speed, it doesn't require any drivers in your CONFIG.SYS
file. It will ignore any drive mappings you have set up using the ASSIGN
command and it will not work with floppies that connect to the parallel port,
such as MicroSolutions' Backpack drives or certain external laptop drives.
Selecting Drive Type
