(Pro/AutoPro)
DiskDupe's Track Range feature allows disks to be serialized in a second pass.
Since bad disks are detected early, breaks in the sequence of serial numbers
are minimized.
Use the following steps to duplicate with Track Range.
- Duplicate the disks with Serial set to Off and Range set to All or
Data.
- Apply labels indicating each disk's serial number.
- Set Range to Serial and Serial to Select One or Follow Image. Select the
file with your serial parameters or create a new one.
- Make sure that Duplicate is selected and press Go when you are ready to
serialize your disks. DiskDupe will only copy the tracks containing the
serial numbers.
DiskDupe automatically determines where the serial locations are. The Start
Search Track and End Search Track settings don't have any effect when writing
or comparing a disk.
With serial turned Off, Track Range's Serial setting has no effect; it works
just like Track Range All.
See Also:
Comparing Serial Numbers with Track Range
